THine THEVA213-V3, Manual

Page: 3 / 13

3/13
THAN0186_Rev.1.
1
0_E
Copyright(C) 2015 THine Electronics, Inc.
THine Electronics, Inc.
Security
E
THEVA214-V3
W1: Connect the 3.3V power supply with pin#1, 2 and 3 of Header1.
W2: Connect the 3.3V power supply with pin#1 and 2 of CON2.
W3: Connect the 3.3V power supply with pin#1 and 2 of CON3.
(a)THEVA214-V3 (Top
Side
) (b) THEVA214-V3 (Bottom
Side
)
Figure 5 THEVA214-V3 Power Supply from / to Each Connector
5. V-by-One
®
Input / Output Connector Select
V-by-One
®
input / output connector can be selected by using 0ohm resistors.
(1) 1mm Pitch Connector (Default Setting)
Please mount / unmount following 0ohm resistors to use 1mm pitch connector.
Table 1 Resistor Setting for 1mm Pitch Connector
Mount Unmount
THEVA213-V3 R4, R5 R12, R13
THEVA214-V3 R28, R30 R48, R49
(a)THEVA213-V3 (Top Side) (b)THEVA214-V3 (Top Side)
Figure 6 Resistor Mounting for 1mm Pitch Connector
W3