Coupling socket 507550 (Binder, series 432), EMC with cable clamp
View X
Cable strain relief
Cable assembly 1
1. String parts onto cable according to
diagram above.
2. Strip off cable sheath 20 mm
Shorten exposed shield by 15 mm
Strip off litz wire 5mm.
Cable assembly 1
Fit shrink tube or insulating tape
between litz wire and shield.
Cable assembly 2
Position shield to rear on
cable sheath if cable diameter
permits.
3. Solder litz wire to female insert,
position shield in cable clamp.
4. Screw on cable clamp.
5. Assemble other parts according to
diagram above.
6. Securely tighten cable strain relief
with spanner (AF16 and 17).
Cable assembly 2
View X
Cable sheath
Shield
Cable clamp
Litz wire
View X
Fig. 1: Connector assembly
4.3811.00.000_US-Anemometer-DSP_eng.doc
8 - 26
021511/10/06
