4.3811.00.000_US-Anemometer-DSP_eng.doc
20 - 26
021511/10/06
9
Command List, Short
Command Description
<id>AA<para5>
Functions for PIN WV/RXD-(Analog channel A)
<id>AB<para5>
Functions for PIN WD/RXD+ (Analog channel B)
<id>AC<para5>
Functions for PIN ADIO (Analog channel C)
<id>AM<para5>
Selection of averaging method (Average mode)
<id>AN<para5>
Analog output mode (Analog output)
<id>AO<para5>
Scaling of analog wind direction output (Angle output)
<id>AR<para5>
Scaling of analog wind velocity output (Analog range)
<id>AT<para5>
Testing of analog inputs/outputs (Analog test)
<id>AV<para5>
Averaging time (Average)
<id>AU<para5>
Update of analog inputs
<id>AY<para5>
Scaling of minimum value for analog input PIN WV/RXD-
<id>AZ<para5>
Scaling of maximum value for analog input PIN WV/RXD-
<id>BH<para5>
Selects the Bavaria Hesse measuring instrument addresses
<id>BR<para5>
Select baud rate (Baud rate)
<id>BX<para5>
Select baud rate (Baud rate extension)
<id>BY<para5>
Scaling of minimum value for analog input PIN WV/RXD+
<id>BZ<para5>
Scaling of maximum value for analog input PIN WV/RXD+
<id>CI<para5>
Selects command interpreter (Command interpreter)
<id>CY<para5>
Scaling of minimum value for analog input PIN ADIO
<id>CZ<para5>
Scaling of maximum value for analog input PIN ADIO
<id>DA<para5>
Data request in Bavaria Hesse command interpreter
<id>DE<para5>
Standard deviation (Deviation)
<id>DF<para5>
Set initial values (Default values)
<id>DM<para5>
Duplex mode
<id>EI<para5>
Analog value in case of error (Error inversion)
<id>FB<para5>
Fast boot
<id>HT<para5>
Heating control (Heating)
<id>ID<para5>
ULTRASONIC ID
<id>KY<para5>
Access mode (Key)
<id>MA>>para5> Automatic adjustment of measured value acquisition (Measurement automation)
<id>MD>>para5> Measuring interval (Measurement delay)
