to either a normal toilet or to an authorised waste
disposal point.
10. Place the waste tank on its side and turn the emptying
spout upwards. Unscrew the emptying spout cap and
empty the waste tank. To avoid splashing when
emptying, keep the vent plunger depressed using your
thumb.
Note! Do not press the vent plunger in until the
emptying spout is pointing downwards.
Rinse the tank out with clean water. If necessary,
prepare the toilet for use once again (see ‘preparing
for use’)
STORAGE
It is important that the following actions are carried out if
you do not expect to use the Thetford toilet for a long period:
-
Empty the water and waste tanks.
-
Press on the pump (flush button) several times until
no water remains in the flush system.
-
Clean both waste and water tanks.
-
Do not replace either the emptying spout cap or the
water tank cap. This will facilitate thorough drying
of the toilet.
-
Allow the toilet to dry thoroughly.
Note! When storing the Porta Potti 465 Electric for
long periods (longer than 3 months) we advise
removing the battery from the pump and storing it in a
cool, dry place.
If the toilet will not be used for a long period, it is advisable
to clean the seals and coat them lightly with olive oil. This
will ensure that they remain in good condition (supple).
ELECTRIC PUMP AND BATTERIES
(only applicable to the Porta Potti 465 Electric)
On average, the batteries supplied are good for 500 to 600
flushes. After this battery power begins to fade and the
pump pressure drops. As a result, during flushing, the
water will not cover the toilet bowl completely. In this case
replace the batteries.
CLEANING AND MAINTENANCE
We advise cleaning the seals and valve blade with Thetford
Bathroom Cleaner.
Note! Never use household cleaners (bleach, solvents or
other powerful cleaning agents). These may cause
permanent damage to the seals and other toilet components.
-
Squirt Thetford Bathroom Cleaner in the toilet.
-
Flush the bowl with water and wipe down the rest of
the toilet with a damp cloth.
Tip! For a really shining toilet, dry it with a soft dry
cloth after cleaning.
-
Thoroughly clean the seals and valve blade, rub them
in olive oil and wipe them over with a cloth or a piece
of toilet paper. Repeat the above operation if the seal
and blade are dirty or if opening and closing the blade
is getting more difficult.
GB
- 2 -
Note! Never use Vaseline or any vegetable oil except
olive oil. These may cause leakage.
If the toilet will not be used for a long period, it is
advisable to clean the seals and coat them lightly with olive
oil. This will ensure that they remain in good condition
(supple).
N.B. The valve blade seal is a part of the toilet that is
subject to wear. Depending on the extent and manner of
service, after a certain period the seal will become less
effective and must be replaced.
WINTER USE
You can use your Thetford toilet as usual in cold weather,
as long as the toilet is situated in a heated location. If this
is not the case there is a risk of freezing. In this case we
advise that the toilet be drained, following the instructions
under ‘Storage’.
For environmental reasons the use of antifreeze, such as
that used in a car radiator, is not advised.
THETFORD WARRANTY
Thetford B.V. offers the end users of its products a two-
year guarantee. In the case of defects within the guarantee
period Thetford will replace or repair the product. In this
instance, the costs of replacement, labour costs for the
replacement of defective components and/or the costs of
the parts themselves will be paid by Thetford.
1. To claim under this guarantee, the user must take the
product to a Service Centre recognised by Thetford.
The claim will be assessed there.
2. If components are replaced during repair under
guarantee, these become the property of Thetford.
3. This guarantee does not prejudice current consumer
protection law.
4. This guarantee is not valid in the case of products that
are for, or are used for, commercial purposes.
5. Guarantee claims falling into one of the following
categories will not be honoured:
-
the product has been improperly used or the
instructions in the manual have not been followed
-
the product has not been installed in accordance with
the instructions
-
alterations have been made to the product
-
the product has been repaired by a Service Centre not
recognised by Thetford
-
the serial number or product code have been changed
-
the product has been damaged by circumstances
outside the normal use of the product
CUSTOMER SERVICE
Please visit our web site if you require further information or
have questions about your toilet, www.thetford-europe.com.
The information available includes frequently asked
