Installation /Owner’s Manual 25
- Remove the two plastic hole caps that are near the strike plate.
- Remove the L-shaped plastic covers that are opposite the hinges.
- Remove and save the screws from the upper cabinet hinge [66a] of each door.
- Put each of these hinges on the other side of the refrigerator as the lower hinge [66b].
- Attach each of these hinges with screws.
- Remove and save the screws from the lower cabinet hinge [67a] of each door.
- Put each of these hinges on the other side of the refrigerator as the upper hinge [67b].
- Attach each of these hinges with screws.
- Remove and save the screw [41] from the front box [68] (See Art02261).
- Pull the front box away from the refrigerator and out from under the logo box [69].
- Reverse the front box and put it on the opposite side of the logo box.
- Attach the front box to the refrigerator with the screw.
- Put the strike plate on the opposite side of the refrigerator [65b].
- Put the two round plastic caps into the holes that are near the strike plate.
- Put the L-shaped plastic covers over the holes that were used by the hinges.
3. Change the position of the door handles (See Art01727):
- Remove the screws [41] and door handle [70] from each door.
- Reverse each door handle and put the lower door handle on the upper door and the
upper door handle on the lower door.
- Attach each door handle with the screws.
4. Reinstall the doors (See Art02273):
- Turn each of the lower hinge pins [64] into the lower cabinet hinges.
NOTE: To prevent damage to the threads of the hinge pins, turn the
hinge pins by hand until tight and then tighten with a screwdriver.
CAUTION:
Apply Loctite removable thread locker (blue) to the
threads of the hinge screws before assembly to prevent loosening
during use. Do not allow Loctite to contact any of the plastic
surfaces of the refrigerator because it can damage those surfaces.
-
Put the washer onto the lower hinge pin of the lower door only
- Put the LH lower hinge support [256] onto the lower hinge of the lower door
only.
- Put each door down onto the lower hinge pin.
- Align the holes in the upper hinges and hold in this position.
- Turn the upper hinge pin into the hinges of each door.
- Tighten the hinge pins.
- Put the storage bins in the doors.
41
70
Art01727
!
68
69
41
Art02261
63
66
254
64
67
256
Art02273
