ThermTec CYCLOPS CP315, User Manual

Page: 15 / 22

Image Setting
Mode Object
mode Especially enhance target’s
detail. It’s recommended to be
used in bad weather conditions.
WDR
mode Gain both background and
target’s detail with wide
dynamic algorithm.
Sharpness 0-10 Adjust image sharpness to make
the image edge sharper. The
recommended value is 5.
Denoise 0-10 Adjust image noise to make the
image cleaner. The recommended
value is 5.
Brightnes
s 1-10 Adjust image brightness to make
the image brighter. The
recommended value is 5.
Contrast 1-10 Adjust image contrast to make the
target more prominent in the
image. The recommended value is 5.
3.4.2 System Setting
Press to enter the System Setting
menu. Select by moving the rocker button,
and short-press the rocker button to
confirm the selection.
System Setting
EIS Electronic Image
Stabilization. Can be
turned on/off in the
system setting.
Ranging AI AI distance measurement
MIL MIL distance measurement
PIP Picture
-in-
picture In the picture, the image
is 2x enlarged from the
center of the cross.