Description of menu points
GBTHIDBA_V(2).DOC
Page - 20
6.24 Keyboard allocation
The type of connected keyboard is set here:
•
German
•
French
•
English (UK)
•
Danish
•
Swedish
6.25 Daily counter
Shows how many labels have been printed since switch-on.
The daily counter is deleted with the RESET button.
6.26 Total counter
Shows how many labels in total have been printed by the machine.
6.27 Operating hours counter
Display of the operating hours counter in the format hours:minutes:seconds.
6.28 Heating energy
The heating energy determines the density level of the printed labels.
The heating energy should only be set as high as necessary to achieve the optimum
printing result.
The thermal print head suffers wear and tear if the heating energy is set too high.
6.29 Copy logos
You can transfer your own logos from your PC to the Thermo-Ident. The logos must be available as Bitmap
(BMP-Format).
The logos are printed with a resolution of 300 dpi (dots per inch). A logo with 100 pixels therefore needs around
8.5 mm.
File name
Height of logo for
Thermo-Ident 1
Height of logo for
Thermo-Ident 2
Logo length
"small" logo
logo1.bmp
100 pixels
150 pixels
max. 150 pixels
"large" logo
logo2.bmp
100 pixels
150 pixels
max. 420 pixels
•
Setup the "IMAGES" folder on a USB stick.
•
Copy the files "logo1.bmp" and "logo2.bmp" into this folder.
•
Plug the USB stick into the corresponding socket on the Thermo-Ident.
•
Press the PLUS button on the operating panel to copy the logos.
•
The copy process takes around 10 to 20 seconds depending on the file size.
