a.
b.
a. ceramic with jets, b. ceramic plate
Smoke chamber
The smoke chamber is at the back side of boiler. The flue gases are directed down of
the ceramic plate and through an opening goes to the smoke chamber after a route
through 3 triangle paths. The triangle paths are in contact with the boiler water so the
flue gases transfer their heat to the water. After that the flues exhaust to chimney and
then to the environment.
The smoke chamber has also and a damper. The tamper connects the feeding
chamber with the smoke chamber. That helps the exhausts to leave from the feeding
chamber to the chimney and not to the boiler room during the start of boiler and
during the feeding process. The damper opens manually with a lever. Before the user
opens the door to fill the boiler with woods they should pull the lever to open the
damper. Then there is no danger to fill the boiler room with smoke and the user could
fill the boiler. When the user completes the filling of the boiler, closes the door and
pushes the lever. The damper closes and the gasification process starts.
The smoke chamber has four covers for cleaning and inspection.
3.2. Technical characteristics
