7
8
Remove the two screws (M4x10mm) and washers (4mm) from the
sideburner valve bracket.
Place sideburner valve under front of sideburner control panel so that
valve stem comes through large hole. Place sideburner bezel over valve
stem. Secure bezel to panel and valve using the two screws and
washers you removed from the valve bracket. Press control knob onto
valve stem.
Insert sideburner into shelf, placing end of burner over
sideburner valve. Valve should be in center hole of burner
tube. Make sure pin on bottom of burner is in center hole
in shelf bracket. Secure burner to bracket with two
screws
,
lock washers
,
and
flat washers
.
.
#10-24x3/8”
(AAA) 5mm
(BBB)
5mm
(CCC)
See illustration below for
correct burner-to-valve engagement
Valve stem
Sideburner bezel
Sideburner
valve
Sideburner
Correct
burner-to-valve
engagement
Pin
in hole
CCC
BBB
461230404 • 9
First, remove
screws and
washers from
bracket.
Valve should be
in center hole in
burner tube.
AAA
