background image

TABLE OF CONTENTS

WARRANTY

For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Grill Service Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Record Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Parts Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-24

Manufacturer warrants to the original consumer-

purchaser that this product shall be free from defects in
workmanship and materials under normal and reasonable
use and correct assembly (if assembled by consumer-
purchaser), from date of purchase.

Stainless steel and die cast parts - 99 years
Electronic ignition and cast iron burners - 10 years
Remaining parts - 2 years

Manufacturer will, at its option, refinish or replace any

product or part found to be defective during the warranty
period. Manufacturer will require you to return the part(s)
claimed to be defective, for its inspection, freight or postage
prepaid.

If you wish to obtain performance of any obligation under

this limited warranty, you should write to:

Manufacturer may require reasonable proof of purchase

and we suggest you keep your receipt. In the state of
California only, if refinishing or replacement of the product is
not commercially practicable, the retailer selling this product
or Manufacturer will refund the purchase price paid for the
product, less the amount directly attributable to use by the
original consumer-purchaser prior to discovery of the
nonconformity. In addition, in the state of California only, you
may take the product to the retail establishment from which it
was purchased or to any retail establishment selling this
product in order to obtain performance under this warranty.

This warranty does not include the cost on any

inconvenience or property damage due to failure of the
product and does not cover damage due to misuse, abuse,
accident, damage arising out of transportation of the product,
or damage incurred through commercial use of the product.
This express warranty is the sole warranty given by the
manufacturer and is in lieu of all other warranties, express or
implied, including implied warranty of merchantability or
fitness for a particular purpose. Neither Manufacturer dealers
nor the retail establishment selling this product has any
authority to make any warranties or to promise remedies in
addition to or inconsistent with those stated above.
Manufacturer's maximum liability, in any event, shall not
exceed the purchase price of the product paid by the original
consumer-purchaser. Some states do not allow the exclusion
or limitation of incidental or consequential damages. So the
above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and may also have
other rights which vary from state to state.

Consumer Warranty / P.O. Box 1240

Columbus, GA 31902-1240

461230404 • 3

Summary of Contents for 461230404

























Reviews: