THERMOROSSI DORICA MAIOLICA, Installation, Use And Maintenance Manual

Page: 10 / 56

Page 10
e manutenzione
Never insert foreign objects into the tank. To access the feedbox firstly remove the tank cover as illustrated in Figure
1.
Caution: it is very important to use the supplied glove when removing the cover as the ceramic can be extremely hot.
Attention: when loading the pellets into the tank take care not to drop any in the inner parts of the appliance, as this
could cause live flames inside the appliance. The manufacturer recommends emptying the tank and vacuuming the
screw feeder zone once a month and during the summer period. The appliance is designed to run on pellet fuel. Use
of other combustible materials in the tank and/or combustion chamber is strictly prohibited.
4 - INSTALLATION
4.1 POSITIONING OF THE APPLIANCE
Follow the general guidelines set out in paragraph 1.1 to the letter. Keep in mind that the flooring of the room in which
the appliance is to be installed must withstand the combined weight of the appliance and the pellets contained in the
tank.
CAUTION: The appliance must be installed in a room with adequate ventilation. The appliance must be positioned at
a minimum safe distance from walls and furnishings. If inflammable items are positioned near the appliance
(matchboarding, furniture, curtains, wall hangings, sofas, etc...), this gap must be increased considerably. The
recommended minimum distances are illustrated in Figure 1. If the flooring is made of wood or any other combustible
material, it is recommended to install a fireproof floor protector plate between the appliance and the floor. Installation
in the vicinity of heat-sensitive materials is only permitted if suitable insulating and fireproof protection is placed
between the object and the appliance (ref. Uni 10683). Failure to observe this instruction will immediately invalidate
the warranty.
The installer must issue a certificate of conformity for the installation which includes the design plans and the
following documents:
a) Report containing the type of materials utilised.
b) Project as defined in Article 5 of Ministerial Decree n° 37 22 January 2008.
c) Drawing of the finished installation.
d) References to existing partial or previous declarations of conformity (e.g. electrical wiring).
e) Copy of the certificate of recognition of the professional technical qualifications.
These documents must, by law, be kept together with the
use and maintenance guide. The customer is responsible
for verifying, directly or indirectly, that the installation has
been carried out to perfection in accordance with relevant
regulations in force. Do not install the appliance in
unsuitable rooms such as bedrooms, bathrooms, garages
and/or lock-ups. It is forbidden to place the appliance in
environments with an explosive atmosphere.
ATTENTION , the stove is not simply a household
appliance: if the instructions set out in this booklet are not
followed and/or if installation of the appliance is not
executed perfectly and/or the provisions in force are not
strictly complied with dangerous conditions could arise for
both objects and persons.
LEGENDA KEY
Figura 1 Figure 1
ISOLANTE TERMICO HEAT INSULATING MATERIAL
T ispezionabile Inspectable Tee element
200/450 mm se materiale combustibile 200/450 mm if the material is combustible
200 mm se materiale combustibile
45
0
m
m
s
e
m
at
er
ia
le
c
om
bu
st
ib
ile
ISOLANTE TERMICO
20
0 m
m s
e m
ate
ria
le
com
bus
tib
ile
45
0
m
m
s
e
m
at
er
ia
le
c
om
bu
st
ib
ile
T ispezionabile
Figura 1