Thermor R4GHD2-Mk22, User Manual

Page: 91 / 94

User’s manual User’s manual
GB

89
12.1.2 - The WIRE PILOT programme
By default, the programme mode on every day of the week is the external programme, the
one responding to the “pilot wire” order (FP) sent by the centralised external programming.
Using this, if your device is connected to a centralised programming installing, you have
no manipulation to be made other than to put yourself in Prog mode.
Press on key
Equilibrium
Set : D/H/Min
Setting appears on the screen.
Press once on key
OK
Set :
Prog
Prog Setting appears.
Validate by
.
Press on keys
or
OK
PROG : Central.
PROG : FP displayed on screen.
Validate by
.
To leave menu, press
on key
Equilibrium
Day Hour
Return to rest screen.
To activate the Prog
mode, press several
times on the right

or left hand

movement keys until
the selection arrow is
on Prog mode.
OK
The mode selection

flashes
above the mode during selection.
13 - IF YOU HAVE A LOAD SHEDDING
If your installing includes a consumption reducer, this can alternatively cut the heating
radiators (depending on your contract with your energy supplier).
Caution, A load shedding system by a power supply cut is incompatible with our radiators
because it damages the thermostat. During load shedding periods, your radiator will
display « Load shedding ». It then returns to its initial operating mode.
During consumption reduction periods, your radiator will display “Consumption reduction”.
It then goes back to its initial operating mode.
14 - MAINTENANCE
Do not perform any maintenance action before switching your equipment off by doing a
long press on the
button.
If you want to maintain the performances of your radiator, you will need to use a vacuum
cleaner or a brush to remove dust from the lower and upper radiator grills about twice
every year.
You can clean the radiator with a damp cloth; never use abrasive products or solvents.
Dirt can accumulate on the radiator grill in a polluted environment. This phenomenon is
related to the poor quality of ambient air. It is recommended that correct aeration of the
room (ventilation, air intake, etc.), and cleanliness of the air should be verified if this arises.
Such dirt will invalidate the radiator replacement guarantee.
15 - IF A PROBLEM OCCURS
Problem encountered Check to be made
The radiator does not
heat
If you are in programming, make sure that the program is in
COMFORT mode.
Make sure that the circuit breakers of the installation are
closed or that the load shedder (if you have one) has not
switched the heating off (see part 13 "If you have a load
shedding).
Check the air temperature in the room; if it is higher than
the set temperature, the heating pictogram will not come on
and the radiator will not heat.
The radiator heats all
the time Check that the radiator is not located in a draft, and that the
temperature setting has not been modified.
Equateur2_1880-1585_interieur.indd 89 18/06/12 06:23