Thermor R4GHD2-Mk22, User Manual

Page: 80 / 94

User’s manual
GB GB
78

10.2 - Switching your radiator on/off
Press the button
for a few moments
OK
OK
Jour Heure
équilibre
The screen lights up and indicates
the default temperature
To put your radiator
on stand-by, press
an hold
(long
press) until «OFF” is
displayed.
OK
OK
équilibre
The radiator displays «OFF” and
then goes off.
10.3 - Switch the screen on
If the screen is not
backlit, press any
button to switch the
screen on.
OK
Jour Heure
équilibre
The screen lights
up.
10.4 - Temperature setting
To activate the screen, press on any key.
The temperature by
default is 19°C.
You can vary this by
pressing on the keys
and .
OK
Press the button to confirm
The heating light indicator is displayed on the screen if the ambient temperature is
lower than the displayed temperature (set temperature).
Wait for at least 6 hours until the temperature stabilises.
The black arrow moves along the consumption indicator between the green and the red
levels. The temperature recommended by Ademe (French Agency for the Environment &
Energy control) is 19°C, and this arrow informs you if your behaviour is within or outside
the recommendation.
Equateur2_1880-1585_interieur.indd 78 18/06/12 06:23