Thermor R4GHD2-Mk22, User Manual

Page: 53 / 94

User’s manual User’s manual
GB

51
1.2.1 - Installation rules
This radiator was designed to be installed in a home.
The installation shall be made according to standard practice satisfying standards in force
in the installation country (NFC 15100 for France).
Respect minimum distances from the furniture to the location of the radiator (see diagram).
If you have a wall lining applied on foam, you will need to place packing behind the radiator
mounting frame with the same thickness as the foam to maintain a clear space behind the
radiator so that its regulation is not disturbed.
Do not install the radiator:
- In a draft that could disturb its regulation
(for example under a Controlled Mechanical Ventilation system, etc )
- Under a fixed power outlet.
- Within volume 1 in bathrooms.
Radiators used in bathrooms must be installed such that switches and other control
devices of the radiator cannot be touched by anyone in the bath or the shower.
1.3 - Fix the wall-mounting frame to the wall
Horizontal model
1 2
Place the wall-mounting frame on the
floor. Mark drilling points A. These
points give the position of the lower
attachments.
Lift the wall-mounting frame making
the previously marked points coincide
with drilling holes A.
Mark the 2 drilling points B using a pen.
You will then have marked the 4 drilling
points.
3
Drill the 4 holes and insert the appropriate inserts for your wall (for example
plasterboard, concrete).
Put the wall-mounting frame into place and screw it into position.
Equateur2_1880-1585_interieur.indd 51 18/06/12 06:21