KAC/KHP/KAC-M/KHP-M Series
Owner’s Manual
4
ThermoPlus Air, Inc. February 2007
Data subject to change without notice.
Startup Supervisaire® Controller Interface
PROGRAM: xxxxxxxx
MAIN MENU
SCROLL DOWN
FOR OPTIONS
Default Screen
HUMIDITY
aaa / bbb %
ROOM AIR ccc / ddd F
GO TO
AUTO/OFF CONTROLS
GO TO
SENSOR READINGS
GO TO
SET POINTS
GO TO
PURGE SETTINGS
GO TO
OCCUPIED PERIOD
OPTIONS
GO TO
CLOCK SETTINGS
There are many possible status messages. This screen is the
gateway to other screens that display these status messages.
See
Operation - Controller Messages
.
The unit ships with the major components disabled in software.
This screen is the gateway to other screens used to enable or
disable the major components of the unit. See
Startup -
Enable Operation
.
There are several sensors throughout the unit. This screen is
the gateway to other screens used to display the readings of
these sensors. See
Startup - Read Sensors
or
Operation -
Read Sensors
.
This screen is the gateway to other screens used for setting the
operating set points of the unit. The set points are protected by
a user password. See
Startup - Adjust Set points
or
Operation - Adjust Set points
.
This screen appears only on units with the optional Purge fea-
ture. This screen is the gateway to other screens used to adjust
or trigger Purge mode. See
Startup - Pre-Startup Adjustments
.
This screen appears only on units with the optional occupation
feature. This screen is the gateway to other screens used to
adjust or define occupied periods. See
Startup - Pre-Startup
Adjustments
.
This screen appears only on units with the optional occupation
feature. This screen is the gateway to other screens used to set
the internal clock (where used). See
Startup - Pre-Startup
Adjustments
.
GO TO
SERVICE MENU
This screen is the gateway to other screens used for service
monitoring or modification.
This displays the version of the
operating program.
GO TO
STATUS MESSAGES
For a controller interface map, see
Operation
.
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Esc
Prg
