26
Before beginning any maintenance on your Y151
Thermo-Seal
machine, finish
any process cycles that may be started. After the process cycles have been
completed, maintenance upon the machine may commence.
Attention!
Before beginning maintenance unplug the Main Air Supply Line Hose
to the Air Filter Pressure Regulator and unplug the Line Power Cord from the
electrical supply.
Maintaining a clean machine will extend the service life of the Y151
Thermo-Seal
machine. The following is the recommended cleaning schedule for
various parts of the Y151
Thermo-Seal
machine.
7.1 Daily Cleaning & Maintenance
To optimize performance of your Y151
Thermo-Seal
machine, the following
parts or areas should be cleaned on a
Daily
basis:
Heater Shield
: should be cleaned following the schedule outlined in
Section
7.4 Heater Shield
.
Rubber Sealing Platen
Tape Guide
: clean following directions in
Section 7.5 Tape Guide
.
7.2 Weekly Cleaning & Maintenance
To optimize performance of your Y151
Thermo-Seal
machine, the following
parts or areas should be cleaned on a
Weekly
basis:
Machine Top Cover/LCD Panel
: remove dust and lint.
Interior Machine Platform
: remove dust and lint.
7.3 Bi-yearly Cleaning & Maintenance
To optimize performance of your Y151
Thermo-Seal
machine, the following
parts or areas should be cleaned on a
Bi-yearly
basis:
Machine Electronics Compartment
: underside of Interior Machine
Platform. Requires removal of Right and Left Machine Covers.
Heater Shield
: inspect, clean or replace.
Rubber Sealing Platen
: inspect, clean or replace.
External Tape Guide Teflon Shield
: inspect, clean or replace.
7. Maintenance
