CONNECTING TO A THERMOMAX UNIT
1.
Connect the Autodialer / QuickDialer Connecting Wire, A7068, from the
terminals labelled BATTERY on the Battery Backup System to the Autodialer
/ QuickDialer input, (as illustrated in the diagram below).
2.
Now connect the N.O. trigger input of the Autodialer / QuickDialer to the
alarm common (C) input of the Thermomax unit.
3.
Connect the Autodialer / Quickdialer N.C. trigger input to the alarm N.C.
output of the Thermomax unit.
4.
Connect the Battery Backup System to the mains and switch on.
Please refer to the set up instructions supplied with the Battery Backup
System.
Fig. 4
On initial power up, the red LED will be lit and the yellow LED will flash
indicating that the recorded message and telephone number have been
erased. The yellow LED will extinguish when set-up is complete.
5
THERMOMAX
C0329 - BATTERY BACKUP SYSTEM
+ TO + OF AUTODIALER
DC
AC
+
+
BATTERY
- TO - OF AUTODIALER
RED WIRE TO + TERMINAL OF BATTERY
BLACK WIRE TO - TERMINAL OF BATTERY
PRESS
