P a g e
|
2
26-1-16
INTRODUCTION:
Thank you for selecting this equipment from the large range of products manufactured
in Australia by Thermoline Scientific.
This manual covers the operation, cleaning, & maintenance instructions for this
equipment. Incorrect operation or use can cause harm or damage to the equipment, therefore
it is very important that you read, understand, and implement the instructions, to ensure
reliable operation.
Please keep this manual in a safe place for future reference.
CONTENTS
INTRODUCTION:
2
UNPACKING:
2
USE & FUNCTION:
2 & 3
LOCATION & INSTALLATION:
LOCATION.
ELECTRICAL
SPECIFICATIONS.
3
PRINCIPLE OF OPERATION:
3 & 4
CONTROL PANEL:
4
OPERATION:
4 & 5
SENSOR CORRECTION:
5 & 6
MAINTENANCE:
CARING FOR STAINLESS STEEL.
TECHNICAL ASSISTANCE.
6
PRODUCT WARRANTY:
7 & 8
UNPACKING:
Remove the equipment from the packing material and check for damage. Notify the detail of
any damage to your supplier or to Thermoline Scientific without delay.
Retain the packing materials until the equipment has been thoroughly tested.
Inventory:
•
Shelves: 150 litre models = 3 shelves, 235 & 330 litre models = 4 shelves, 500 litre
model = 5 shelves.
•
Operating Instructions.
•
Electrical mains cable.
USE & FUNCTION:
The Thermoline range of Premium Laboratory Ovens are designed and manufactured in
Australia for all non-critical laboratory and light industrial functions. This range includes seven
models, one which has an optional temperature range up to 300ºC.
Depending on the model selected, either gravity convection (models ending with “G”), for low
capacity drying and conditioning of samples, or fan forced (models ending with “F”), for
increased performance and closer tolerance temperature uniformity.
Models TO-152G, TO-152F, TOH-152G & TOH-152F are suitable for laboratory bench or floor
mounting.
Models TO-235F & TO-330F are suitable only for floor standing.