P a g e
|
4
26-1-16
On the fan forced models a circulating fan blows the air across a heating element mounted
behind the ceiling panel, down a rear air duct, and across each shelf level for even
temperature distribution.
On gravity convection models the element is located at the bottom of the oven.
The temperature sensor provides an accurate measure of the temperature inside the oven.
CONTROL PANEL:
Page button:
Used to view calibration offset parameter.
Scroll button:
Not used by the operator.
Side arrow:
Used to move the cursor when changing temperature.
Down arrow:
Used to decrease parameter setting.
Up arrow:
Used to increase parameter setting.
OPERATION:
1. Locate the oven as previously described in “Location”, plug the mains lead into the
power supply and turn on the power point.
2. Turn on the main switch on the control panel. The switch is illuminated so you will know
when it is on. The temperature will go through a short warm up period where all
segments of the display will be on, before indicating the set temperature (SV) on the
lower display and oven temperature (PV) on the top display.
3. The Omron E5CC is a microprocessor based instrument that has been factory
configured for range, sensor type, and engineering parameters for optimum control.
