6
the dcc can be mounted:
- on a ceiling
- on a wall
note: the dcc controller must be mounted so that
the nameplate remains visible at all times.
do not install the dcc:
- outdoor
- in a location with high level of risk.
- nearby inflammable materials, explosives
or fuels, chemical products and vapors.
3. before installation, check the dcc mounting position.
wall installation
refer to the information on the
enclosure to insure proper installation.
step 3: installation
Ceiling installation
1. remove the 4 cover screws.
2. fix the ceiling mounting support on the dcc.
3. lift the dcc using the ceiling mounting support.
4. position the dcc at the intended location.
5. fix the dcc with the anchors for the type of surface.
6. check that the dcc is adequately fixed to the wall or ceiling.
7. remove the ceiling mounting support.
wall installation
1. remove the 4 cover screws.
2. position the dcc at the intended location.
i
Warranty automatically void if the dcc is installed incorrectly.
warninG
Ceiling installation
the installation may be
done in any direction.
dcc installation
step 1: CHeCk tHe paCkaGe Contents
1 x ceiling mounting support
1
INSTALLATION MANUAL
MANUEL D’INSTALLATION
MODELS
MODÈLES
DCC-10-40A, DCC-10-50A, DCC-10-60A
Manufactured by
Manufacturé par
Designed by
Design par
MAIN POWER SUPPLY
240/208V, Single Phase
100A - 125A - 150A - 200A
ALIMENTATION PRINCIPALE
240/208V Monophasé
100A - 125A - 150A - 200A
APPROVED MARKET
North America
MARCHÉ AGRÉÉ
Amérique du Nord
JUNE 2017
JUIN 2017 V3
ENGLISH
FRANÇAIS
Read and save these instructions
Lire et garder ces instructions
1 x installation manual
i
to access our installation video, visit our website www.dcc.technology
1 x dcc
installation video
2 x current transformer (ct)
step 2: preparations For installation
1. disconnect the main power
2. select the dcc intended location.
select an intended location preferably less than 6 feet away from
the electric panel (power source). the current transformers sup-
plied have a wiring of 6 feet in length, but can be extended to 18
feet’s (see the section Step 4: Conductor connexions for the exten-
sion details).
Summary of Contents for DCC-10 series
Page 2: ...2...
