Program description
FB-KE: 07
SRC KNX
Rev 1
SRC_KNX_620_BMA_E_2009_10_08_001.doc
Seite 6 von 14
Erstellt am 12.01.2010
A long keystroke causes the move command for the blind to be sent. A short keystroke stops the blind, or rotates the
slats if the blind is already at a standstill.
The command direction is up for the top key and down for the bottom key.
-
Slats - blind down/up (rocker top/bottom)
Same as above, but the functions of the top and bottom of the rocker switch are reversed.
The time that defines a long keystroke can be adjusted for all three functions.
Comm. object
KNX (EIB) type
Size
Channel … : Slats
1.009 (EIS 1)
1 bit
Channel … : Blind
1.008 (EIS 1)
1 bit
Temperature sensor
The following temperature sensors can be learned in:
Thermokon range SR04/SR07
Thermokon range SR04 rH (with rel. humidity)
Omnio range RTF10x
Siemens range QAX9xx
Stuhl range 11.F/x
Thermokon SR65VFG/SR65AKF
Thermokon SR65/SR65TF
The following communication object is always available for all temperature sensors:
Comm. object
KNX (EIB) type
Size
Channel … : Temperature
9.001 (EIS 5)
2 bytes
The following sensor options are supported in addition to the temperature:
-
Slide switch/presence key
Some Thermokon devices have either a presence key or a slide switch.
If the “Presence key” function is selected on the ETS, pressing the key causes the gateway to send an ON telegram.
An OFF telegram is not sent in this case.
If the slide switch is selected, the gateway evaluates the status of the switch every time a telegram is sent. If the
status has changed, the corresponding telegram is sent.
Comm. object
KNX (EIB) type
Size
Channel … : Presence
1.001 (EIS 1)
1 bit
-
Set value adjustment
For the set value adjustment, the temperature that is to be sent when the switch is positioned all the way to the left
and right can be set. These two limit values are used to calculate the values sent for the positions between these
limits. The resolution is 0.5°C. If the right limit is lower than the left limit, the values are exchanged. The maximum
adjustable range of the limit values is from -30 °C to +30 °C.
Comm. object
KNX (EIB) type
Size
Channel … : Set value
temperature
9.002 (EIS 5)
2 bytes
-
Multiple contact switch
Depending on the device type, different functions are available:
The Omnio, Siemens and Stuhl devices can be equipped with a multiple contact switch with 4 stages for the
"Automatic", "Day", "Night" and "Frost" control modes. When the switch is set to one of these stages, an ON telegram
