ThermoFLUX Minitherm AQUA, User And Maintenance Manual

Page: 31 / 44

Minitherm AQUA
31
After ignition of pellet, and after tempereture of flue gasses raise on value of 55 °C,
regulation receives signal that fire is on and stove continues to work with set values.
6.2 Shutting down of stove
Press and hold button 4 for 3 (three) seconds. On display it is written CLEANING
FINAL . Suction fan is working on maximum, feeding of pellet is stopped.
6.3 Stove power adjustments
During working phase, it is neccesary to set working power in which we want stove to
work. Adjustments of the working power is possible in the range from
1-5 , and
selection of desired power is done by buttons 5 or 6 (*1). On upper line it is writen
WORK and set power (*2), and present working power sign is blinking on lower line
on the right side (*3). Power 1 is lowest and power 5 is highest power.
Regulation on the stove is set in the way to modulate (power goes into lowest one) it's
work when 4 C is reched below set temperature – read 6.5 Modulation
1 2 3