ThermoFLUX Minitherm AQUA, User And Maintenance Manual

Page: 7 / 44

Minitherm AQUA
7
2 Safety instructions
2.1 Proper use
Minitherm AQUA stove was built in accordance with safety regulations.
 EMC (2004/108/EC)
 LVD (2006/95/EC)
 RoHS 2 (2011/65/EU)
The stoves fulfill other specified standards and specifications: EN 55014; EN 60335-1;
EN 55014-2; EN 60335-2-102; EN 61000-3-2; EN 50366; EN 61000-3-3.
Improper use of the stove can result in bodily injury, leading ultimately to the death
of users and/or others as well as damage to the stove itself or other property.
2.2 Basic principles and operation
The Minitherm pellet stove is a special space heater intended exclusively for domestic
use and intended only for burning wood pellets of 6mm diameter and 300mm length.
During operation, the integrated heat exchanger produces hot water which is delivered
to a central heating system. The integrated pump only switches ON when the preset
water temperature in the system (50°C) is reached. For normal operation, it is only
necessary to start the stove and select the desired power value or temperature. By
installing the room thermostat, I t is possible to automatically ignite and control the
stove. The pellets automatically fall into the burn pot and then are ignited with an
electric heating cartridge. Depending on the set value of the power, the pellet conveyor
automatically adds the required amount of pellets. The required air supply for
combustion into the combustion chamber is controlled. The resulting heat energy in
the combustion chamber is supplied to the central heating. At the end of the
combustion chamber there is an exhaust fan, which releases the flue gases created in
the chimney. Every day it is recommended to clean the ashes.
Every 1-2 months or after consumption of approx. 500kg Enplus (A1) pellets a cleaning
of the flue gas chamber and the pipe heat exchanger is required. The devices are
designed and tested so that they can be installed in homes and have the necessary
approvals. For the combustion air is needed. For this reason, the combined use of
kitchen exhaust systems, and the ventilation in the same room with a stove is not
allowed.
The stove was designed to burn wood pellets. The manufacturer will accept no
responsibility for any damage resulting from improper use. Proper use includes
maintaining the installation, operation and maintenance specified by the manufacturer.
Minitherm stove was built in accordance with safety regulations. However, its
use can result in the injury or death of the user and/or third part and in
impairments to the stove itself or to other material goods.