ThermoFLUX Minitherm AQUA, User And Maintenance Manual

Page: 37 / 44

Minitherm AQUA
37
8 Alarms
Display Description Solution
Alarm active-
indicated next to the sign
for alarm
Cancel the alarm can be executed by
pressing the button 4 .
After that, the display lists FINAL
CLEANING lasting 4 minutes. After
that we can restart the stove if we
solve the problem.
SMOKE PROBE
AL 2
Flue gas temperature
sensor is defective or not
connected.Stove lists alarm
is active and goes off.
Call service
HOT FUMI
AL 3
Flue gas temperature is
above the allowed (250 ° C).
Stove lists alarm is active
and goes off.
The stove has not been cleaned,
smoke sensor is dirty.
Clean stove and restart the ignition.
Excessive amounts of feed pellets.
Call service
NO IGNITION
AL5
Failed ignition
No pellets in the silo - fill the pellets
in a silo
Dosage spiral empty - initial filling
A foreign object stuck dosage spiral -
clean
Poor quality pellets (wet pellet, long
pellets, dust into pellets) - change the
type of pellets
Pellet igniter is defective - replace it
Contact Service
Restart the stove.
NO PELET
AL 6
During operation of the
stove, flue gas temperature
has decreased below the
permitted values
No pellets in the silo - fill the pellets
in a silo
Dosage spiral empty - initial filling
A foreign object stuck dosage spiral -
clean
Poor quality pellets (wet pellet, long
pellets, dust into pellets) - change the
type of pellets
Call service
AIR PROBE
Air temperature sensor is
faulty or not connected.
Stove lists alarm is active
and goes off.
Call service
SAFETY THERMAL
Safety thermostat (STB) has
been activated because the
stove air temperature
exceeded 95 ° C.
Wait for the stove to cool down and
then unscrew the plastic cap and
suitable tool to reset the switch.It is
possible that the pump is is out of
service and there is no air circulation
Call service.