background image

Countess

 II Automated Cell Counter User Guide

 

 

 

23

 

 

3.

 

Select the profile you wish to edit, then press 

Import settings

.  

Note:

 You can select only a previously saved or an empty profile. The Default 

profile cannot be edited. 

4.

 

The Edit profile screen opens and displays the edited count parameters from 
the Adjust screen (page 21).  

Note:

 If you have selected a profile that had been previously saved, the name 

of that profile populates the Profile name text box by default. Otherwise, the 
textbox remains empty.  

 

5.

 

To change the name of the selected profile, press the 

Profile name

 text box and 

enter the desired name using the 

alpha-numeric keypad

 as described on 

page 14. 

6.

 

Optional

: If desired, make additional changes to the profile and the count 

parameters as described on page 13. 

7.

 

Click 

Save

 to save the new profile settings and return to the Results page for 

the last count. The profile name will be displayed without the “(*)” symbols. 
Click 

Cancel

 to return to the Results page for the last count without saving the 

changes to the profile. The profile name will be displayed with the (*) symbol, 
indicating that the count parameters for the selected profile had been altered, 
but not yet saved. 

Summary of Contents for AMQAX1000
























































Reviews: