THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171
Ph: 03 9562 3455 Fx: 03 9548 3979 www.thermofilm.com.au
E L E X
e u r o
C
O
N
V
E
C
T
I
V
E
P
A
N
E
L
H
E
A
T
E
R
S
Step 5
: Press the button
until the time advances to 17:00, and the zone between 13:00 to 17:00
will be blank (OFF).
Step 6
: Press the button
until the time advances to 23:00, and the zone between 17:00 to 23:00
will be black (ON).
Step 7
: Press the button
until the time advances to 00:00, and the zone between 23:00 to 24:00
will be blank (OFF).
Step 8:
Press the
programme button
to complete the setting for the day.
The control panel
will now show the correct day. The programme is now active and is running on ‘real time’.
Note: You must programme the full 24 hour ON / OFF period (until the time reaches 00:00) for the
timer to function correctly. If you go past the 00:00 (and move to 01:00) you will need to programme
the 24 hour programme for that day again.
Copy the 24-hour program
If you would like the same 24-hour program to work for another day or days in the week, the
programme can be copied onto the selected day.
For example, you have just created a 24 hour programme for Monday, and you wish to copy
this Monday programme to Tuesday.
Step 1
: Press the programme button
and then press the
button
to move the “[ ]” to
M
(Monday).
Step 2
: Press the copy button.
The symbol “
COPY
” will appear on the LCD screen. The “[ ]”
around the
M
will flash.
(If you would like to cancel the
COPY
order, please press the button
again, the symbol “
COPY
”
will disappear accordingly.)
Step 3
: Press the timer button
to move the “[ ]” around
T
(Tuesday). The “[ ]” will appear around the
M
and
T
.
Step 4
: Press the copy button
to complete the operation. The “
COPY
” and
[M]
symbol will
disappear.
To copy this same Monday programme to another day, repeat from Step 3.
Press the button
to terminate the “
COPY
” function. The control panel will now show the
correct day. The programme is now active and is running on ‘real time’.
3.3.6 Adjust the Temperature of a Running Programme
The temperature sensed by the thermostat sensor is relative to the position of the heater in the
room. If the actual temperature is higher than the setting, compensate this by adjusting the
temperature setting.
