5
9. Insert the screw through the mounting bracket and the heater handle, tighten the nut.
10. Loosen the screw to remove the wiring compartment/connection cover in the rear of the heater.
11. Run the electrical power supply cable in flexible conduit and connect to the wiring compartment
via the knock-out at back side of the unit.
12. Make the connections properly with connectors which are suitable for the conductor size, in
cluding grounding wirings. And after making the connections, arrange the pigtail leads of unit
and power supply wires in the wiring compartment.
13. Replace the wiring compartment/connection cover and lock in place with the screw.
