Orion Star A222 and Star A322 Portable Conductivity Meters
North America
166 Cummings Center
Beverly, MA 01915 USA
Toll Free: 1-800-225-1480
Tel: 1-978-232-6000
[email protected]
Netherlands
Tel: (31) 033-2463887
[email protected]
India
Tel: (91) 22-4175-8800
wai.asia@thermofisher.com
©2011 Thermo Fisher Scientific Inc. All rights reserved. All trademarks
are the property of Thermo Fisher Scientific Inc. & its subsidiaries.
Water Analysis Instruments
www.thermoscientific.com/water
China
Tel: (86) 21-68654588
wai.asia@thermofisher.com
Singapore
Tel: (65) 6778-6876
wai.asia@thermofisher.com
Japan
Tel: (81) 045-453-9175
wai.asia@thermofisher.com
Australia
Tel: (613) 9757-4300
in Australia (1300) 735-296
InfoWaterAU@thermofisher.com
9 0 0 1 : 2 0 0 8
68X576602 RevA 0811
Viewing the Calibration Log
1. In the measurement mode, press
.
2. Press
,
,
or
to highlight
View Log
and press
f3 (select)
.
3. Press
or
to highlight
Calibration Log
and press
f2 (accept)
.
4. Press
or
to highlight
Conductivity – Channel
and press
f2 (select)
.
5. Press
or
to highlight
Conductivity, Resistivity, TDS, Salinity
or
Temperature
as the calibration type
and press
f2 (select)
.
6. The meter will display a list of calibrations for the selected channel and calibration type. The list shows the
sequential number of the calibration and the date and time it was saved (
07/01/2011 12:45
).
7. To view the calibration data, press
or
to highlight a specific calibration and press
f2 (select)
.
Press
f2 (print)
to print the calibration or press
f1 (back)
to return to the list of calibrations.
8. Press
to return to the measurement mode.
Viewing the Data Log
1. In the measurement mode, press
.
2. Press
,
,
or
to highlight
View Log
and press
f3 (select)
.
3. Press
or
to highlight
Data Log
and press
(accept)
.
4. The meter will display a list of the data points. The list shows the sequential number of the data point and
the date and time the data point was saved (
07/01/2011 12:45
).
5. To view the measurement information for an individual data point, press
or
to highlight the data point
and press
f2 (select)
. Press
f2 (print)
to print the data point or press
f1 (back)
to return to the list of data points.
6. Press
to return to the measurement mode.
