8 | Introduction
Smart Remote Contact
Architecture Overview
Smart Remote Contact connect wirelessly to your LoRa
receiver, just as the other wireless data loggers in your
network:
Figure 2. Smart-Vue Pro web monitoring platform
The Smart-Vue Pro web monitoring platforclickm triggers the
Smart Remote Contact wirelessly when it detects an alarm
condition on an end-module or repeater.
Requirements and
Recommendations
For the purposes of this installation guide we assume that:
•
Your access to the Smart-Vue Pro web platform and
application is configured and you have appropriate
access rights to configure devices in the system.
•
LoRa wireless coverage is available at the location where
you will be using the Smart Remote Contact device.
General Requirements and
Recommendations
•
For safety reasons, the Smart Remote Contact device
should be mounted less than 2 meters (about 6.5 feet)
from the floor.
•
The AC adapter used for your wireless Smart Remote
Contact device should be plugged into an uninterruptible
power supply (UPS).
•
Weekly manual system testing should be performed as
defined in your Standard Operating Procedure (SOP).
•
Thermo Fisher Scientific recommends Installation and
Operational Qualifications (IQ/OQ) be performed before
initial use.
Where to Find More
Information?
The use and operation of your Smart Remote Contact device
is described in the Smart-Vue Pro web application user guide.
You may click
Help ->Online Help ->User guides
to open it
directly from the web application interface.
Smart-Vue
Pro
LoRaWan
enabled
dataloggers
Smart
Remote
Contact
Smart-Vue Pro
LoRaWAN
gateway
Smart-Vue
Pro Cloud
Smart-Vue Pro
web application
Customer
Service
