Thermo Scientific SHKE8000 Series, Maintenance Manual

Page: 60 / 106

Caution Do not substitute! Replace these fuses only with fuses of identical
electrical ratings.
s
Five circuit boards control the Stackable Shaker. Four boards are located in
the relay tray compartment, the fifth is behind the liquid crystal display.
Refer to the relay tray illustrations on the following pages.
Two temperature sensors are located on the air intake grille on the right
side of the chamber (Figure 4-8). To access these sensors, remove the
protective cover, then disconnect the sensors from their respective clips.
Model SHKE8000 Series Shakers 4-5 Thermo Scientific
Section 4
Service
Fuses (continued)
Models SHKE8000 and SHKE8000-7
Rating Application Part Number
0.25 amp Main Power Relay Board 230144
1.6 amp Drive Motor 230145
Models SHKE8000-ICE and SHKE8000-8CE
0.15 amp Main Power Relay Board 230142
0.8 amp Drive Motor 230141
Table 4-2. Fuses
Circuit Boards
Temperature Sensors
Figure 4-8. Temp Sensor Location