Thermo Scientific SHKE8000 Series, Maintenance Manual

Page: 34 / 106

To access the system Configuration menu, press the down arrow, the up
arrow, then the Silence button, in that order. This screen will appear on
the display.
Pressing the down arrow
continues system configuration.
Pressing the up arrow returns to
the Operating Screen.
During the following configuration procedures, menu options are given to
either modify a setting as it appears in sequence, or to scroll past to the
next item. If no selection is made by pressing a button or arrow, the
display reverts to the Operating Screen in about fifteen seconds. The
complete configuration menu is shown in the chart at the end of this
section.
Note In these procedures, values and settings for time, temperature,
speeds, alarms, and so forth are shown on the display screens. These
numbers are for example only and may not be the values encountered
when programming your shaker.
s
Begin by pressing the down arrow, the up arrow, and the Silence button.
The following screen displays:
When this screen opens, press the
down arrow once.
At the screen at right, press the
Time button beneath Audible.
The following screen appears and
the current setting flashes.
Press the up or down arrow to
turn the audible alarm function
on or off. Pressing any of the
three buttons (Time, Speed or
Temp) returns the display to the
previous screen. Not pressing
anything for about 15 seconds returns the display to the Operating Screen.
When the audible alarm is disabled, a warning message displays in the
Setpoint portion of the Operating Screen
as shown at right.
Model SHKE8000 Series Shakers 2-11 Thermo Scientific
Section 2
Operation
Change Configuration
Turn the Audible Alarm On
and Off