Thermo Scientific Sarasota SG901, User Manual

Page: 19 / 99

Thermo Fisher Scientific Sarasota SG901 User Guide
2-1
Chapter 2
Installation
Note
Installation must be carried out in accordance with local site
requirements and regulations.

Refer to the drawings in the drawing appendix for this chapter.
The structure the equipment cabinet will be mounted to shall support four
times the weight of the equipment. Refer to the specification appendix for
unit weight.
The weatherproof cabinet should be mounted securely to a vertical surface
with the process connections at the bottom of the unit. Refer to the
dimensional drawings for mounting dimensions.
The gas inlet should be connected to a suitable tapping on the sample
stream via 1/4-inch bulkhead unions. Inlet piping should be kept as short
as possible to minimize system response time.
The pressure available at the inlet to the Sarasota SG901 system should be
at least 0.4 bar (6 psi) above the control pressure set in the system to ensure
regulation.
Where the ambient temperature can drop below the dew point of the
sample gas, the lines should be insulated or heated.
If the sample stream is at high pressure, a pressure reduction system may be
used to decrease the standard volume in the sample line.
Mechanical
Considerations
Cabinet Support
Structure
Weatherproof
Cabinet
Pipelines/Sample
Tubing