Thermo Scientific RadEye GF, Operating Instructions Manual

Page: 58 / 114

6-6 DB-083 E RadEye GF-Series
Le/Ff 20.07.2015
To do this, open the File menu, click on Open Logfile..., and
enter path and name. The file is stored with the file name ex-
tension ".log".
If another file of the same name exists, the system asks wheth-
er that file shall be overwritten or the new measured data shall
be appended to the existing data.
Once you have pressed OK to confirm the entries, the meas-
urement log file is created and the polling measured data is
stored in the scan interval you have defined. An open meas-
urement file is indicated by the name and the path of the
measurement log file that appears in the top right-hand corner
of the window.
To terminate data storage, open the File menu and select the
Close Logfile menu item. No further data is recorded.
Open the File / View Logfile... menu to view the measurement
log file.
For training and demonstration a prior recorded log file can be
replayed by opening Replay logfile.
With the buttons Start and Stop together with the polling in-
terval the replay can be controlled.
Close Replay switches back to accessing measurement values
via infrared interface.