Thermo Scientific RadEye GF, Operating Instructions Manual

Page: 33 / 114

RadEye GF-Series DB-083 E 3-11
Le/Ff 20.07.2015
3.4 Alarm thresholds
There are two alarm thresholds, each allocated to dose and
dose rate.
In order to avoid dose alarms while using the instrument ex-
clusively as a rate meter, the dose alarms can be set to the
maximum level.
Configuration of the alarms is possible via infrared interface
(chapter 6.4) or via the menu.
As to the alarm activation, please also read chapter 4.2.
3.5 Setting alarm thresholds
The menu options
Alarm Dose
Rate
and
Alarm Dose
allow the alarm thresholds to be modified. For this setting, the
user has 255 seconds time. Changing the value is effected by
pressing the left (Change) button if the corresponding “Alarm”
is selected:
To increment the number, press the
▲
/
▼
keys. To go on to
the next digit or to quit the edit mode, menu use ◄ / ► keys.
Once the last number has been set, quit the editing mode by
pressing the “Exit”-key. Then, the value set is saved and after
10 s the unit returns to the basic display.