Use the up or down arrow keys to select if you want the internal door
lamps to be on or off at your first hour and minute selection. After
your selection is displayed, press the ENTER key and the displays will
change to the following:
Use the up or down arrow keys to select your choice for the second
hour for Sunday. Note the AM/PM lamps. After your selection is
displayed, press the ENTER key and the displays will change to the
following:
Use the up or down arrow keys to select your choice for the second
minutes for Sunday. After your selection is displayed, press the
ENTER key and the displays will change to the following:
Use the up or down arrow keys to select your choice for the setpoint
you want the growth chamber to switch to a your second hour and
minute you have chosen. After your selection is displayed, press the
ENTER key and the displays will change to the following:
Use the up or down arrow keys to select if you want the internal door
lamps to be on or off at your second hour and minute selection. After
your selection is displayed, press the ENTER key and the displays will
change to the following:
At this point, the whole sequence starts over except that it is for
Monday instead of Sunday.
If any of the selections are already what you desire, for any day, just
press the ENTER key to advance to the next parameter.
While in PROGRAM mode, if you do not press any keys for 10
seconds, the growth chamber will automatically return to the normal
operation mode.
Plant Growth Chamber
3-5
Thermo Scientific
Section 3
Operation and Calibration
