Thermo Scientific LevelPRO Series, Installation Manual

Page: 17 / 111

Thermo Fisher Scientific LevelPRO Installation Guide
3-1
Chapter 3
Hardware Installation
Read the Gamma Radiation Safety Guide (p/n 717904) PRIOR TO
installing the equipment.
Note
Copies of the drawings referenced in this manual are provided in
Appendix C.

For detector-transmitter housing layout details, refer to drawing 868502.
For mounting dimensions, refer to drawing 868672 or 868674 for water-
cooled units.
A variety of source housings are used with the scintillation detector
depending on the requirements of the application. Refer to the appropriate
drawing for your source.
Warning
The instrument is a nuclear device regulated by federal and / or
state authorities. You are responsible for knowing and following the
pertinent safety and regulatory requirements. Refer to the Gamma
Radiation Safety Guide (p/n 717904) for a summary of these
requirements.

Warning
Moving or removing an installed source housing or any assembly
that includes a source housing requires a person who is specifically licensed
to install and commission Thermo Scientific source housings.

In the United States, your general license permits you to own and install all
of the instrument’s components, including the source housing. However,
you may not commission the instrument (remove the lock and open the
source housing shutter for the first time) without a specific license
authorizing radiation commissioning of the instrument. In Canada, you are
only allowed to remove the instrument from the shipping container if your
CNSC license has a condition authorizing mounting / dismounting of
devices. For assistance obtaining a license and / or commissioning /
decommissioning the instrument, contact Thermo Fisher Scientific .
Licensing