4-2
Hotplate & Magenetic Stirrer
Thermo Scientific
Section 4
Control Panel
G
CONFIG
button
When this device is stop conduction, Configuration Functions can be set.
When user wants to change mode, press the Config. Button with stirrer knob
to clockwise turning. Then the mode can be switching in the following order.
Unit
Changing the temperature unit
“Cels” - Celsius, “Fahr” - Fahrenheit
Time
Changing timer mode
Offset
Changing Offset setting
Limit
Set maximum heater rate when used to temperature control.
t-H
Highest temperature set top plate and external temperature
sensor
t-L
Lowest temperature set top plate and external temperature
sensor
List
Indicating the set value to turning stirrer knob.
Calibration
Matching Auto tuning the device to current situation or best
condition.
Coefficient
Select to using control temperature coefficient.
Default
Change all the settings to the default values
Motor
Minimum
Minimum stirring speed set (range : 1~1000rpm)
Escape
Config. mode to be end
H
Speed display
STIRRER speed, timer
I
Heater knob
Temperature setting
J
Stirrer knob
STIRRER speed setting, value setting on Config.
Knob –
Set a value and select an function, turn knob left or right.
Control panel (continued)
