Thermo Scientific HM525 NX Series Operator'S Manual Download Page 38

Page: 38 / 71

Thermo Scientific HM525 NX Operator Guide

Trim and Fine Section Thickness

To set the trim/trimming section thickness:

•

Press the "Trim Thickness" button on the Main

screen.

•

The Trim Section screen will be displayed.

•

Either select one of the preset values (400µm,

200µm, 100µm or 10µm) or adjust the value
using the arrow buttons.

•

For details of the thickness steps see Technical
Specifications.

•

Press "OK" to confirm the setting and to return
to the Main screen.

•

Press the "Back" button to exit back to the Main
screen without saving the changes.

Set the Fine Section Thickness

•

Press the "Fine Section Thickness" button on the
Main screen.

•

The Fine Section screen will be displayed.

•

Either select one of the preset values (100µm,
50µm, 10µm or 5µm) or adjust the value using

the arrow buttons.

•

For details of the thickness steps see Technical

Specifications.

•

Press "OK" to confirm the setting and to return
to the Main screen.

•

Press the "Back" button to exit back to the Main
screen without saving the changes.

•

Remaining Distance to Front End Position is
displayed beneath the Fine Section area.

Summary of Contents for HM525 NX Series








































































Search results

Summary of Contents for HM525 NX Series

Reviews:

Related manuals for HM525 NX Series

Brands by name

Popular brands

Thermo Scientific HM525 NX Series, Operator'S Manual

Search results

Summary of Contents for HM525 NX Series

Reviews:

Related manuals for HM525 NX Series

Brands by name

Popular brands