Thermo Scientific HM525 NX Series Operator'S Manual Download Page 33

Page: 33 / 71

Thermo Scientific HM525 NX Operator Guide

System Interfacing

Using the Touch screen

The HM525 NX has an embedded touch screen user interface which is used to set all preferences.

Note

Avoid using sharp or pointed objects to press buttons on the touch screen. It is recommended that a clean

finger is used to operate the touchscreen. However, if you require a stylus, the eraser-tipped end of a pencil is

suitable.

Main Screen

The Main screen appears after the instrument has been switched on.

Fast forward movement of specimen

head

Slow forward movement of specimen

head

Fast Backward movement of specimen

head

Trim thickness

Chamber temperature

Section thickness

Remaining Travel

Cryobar button

Menu button

Position button

Retraction button

Counter mode (sum of sections, number

of sections)

Time/Date button

TRIM button

•

Press the required button to activate / deactivate the function or to display the options screen for

the selected function - See Setting Preferences.

OK Button

Press the “OK” button to save any changes to specific settings.

Back Button

Press the “Back” button to return to the previous menu without saving any

changes.

Summary of Contents for HM525 NX Series








































































Search results

Summary of Contents for HM525 NX Series

Reviews:

Related manuals for HM525 NX Series

Brands by name

Popular brands

Thermo Scientific HM525 NX Series, Operator'S Manual

Search results

Summary of Contents for HM525 NX Series

Reviews:

Related manuals for HM525 NX Series

Brands by name

Popular brands