- 3 -
Section I Saf
Section I Saf
Section I Saf
Section I Saf
Section I Safety
ety
ety
ety
ety
Warnings
Warnings
Warnings
Warnings
Warnings
Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your unit. If you have any
questions concerning the operation of your unit or the information in this
manual, contact our Sales Department.
Performance of installation, operation, or maintenance procedures
Performance of installation, operation, or maintenance procedures
Performance of installation, operation, or maintenance procedures
Performance of installation, operation, or maintenance procedures
Performance of installation, operation, or maintenance procedures
other than those described in this manual may result in a hazardous
other than those described in this manual may result in a hazardous
other than those described in this manual may result in a hazardous
other than those described in this manual may result in a hazardous
other than those described in this manual may result in a hazardous
situation and may void the manufacturer's warranty.
situation and may void the manufacturer's warranty.
situation and may void the manufacturer's warranty.
situation and may void the manufacturer's warranty.
situation and may void the manufacturer's warranty.
Observe all warning labels.
Observe all warning labels.
Observe all warning labels.
Observe all warning labels.
Observe all warning labels.
Never remove warning labels.
Never remove warning labels.
Never remove warning labels.
Never remove warning labels.
Never remove warning labels.
Never operate damaged or leaking equipment.
Never operate damaged or leaking equipment.
Never operate damaged or leaking equipment.
Never operate damaged or leaking equipment.
Never operate damaged or leaking equipment.
Never operate the unit without bath fluid in the bath.
Never operate the unit without bath fluid in the bath.
Never operate the unit without bath fluid in the bath.
Never operate the unit without bath fluid in the bath.
Never operate the unit without bath fluid in the bath.
Never use pure ethylene glycol as a bath fluid. A minimum 80/20
Never use pure ethylene glycol as a bath fluid. A minimum 80/20
Never use pure ethylene glycol as a bath fluid. A minimum 80/20
Never use pure ethylene glycol as a bath fluid. A minimum 80/20
Never use pure ethylene glycol as a bath fluid. A minimum 80/20
mixture of Ethylene Glycol and tap water is allowed.
mixture of Ethylene Glycol and tap water is allowed.
mixture of Ethylene Glycol and tap water is allowed.
mixture of Ethylene Glycol and tap water is allowed.
mixture of Ethylene Glycol and tap water is allowed.
For 220 - 240 volt units supplied without a line cord, use a harmonized
For 220 - 240 volt units supplied without a line cord, use a harmonized
For 220 - 240 volt units supplied without a line cord, use a harmonized
For 220 - 240 volt units supplied without a line cord, use a harmonized
For 220 - 240 volt units supplied without a line cord, use a harmonized
(HAR) grounded 3-conductor cord, type H05VV-F, with conductors
(HAR) grounded 3-conductor cord, type H05VV-F, with conductors
(HAR) grounded 3-conductor cord, type H05VV-F, with conductors
(HAR) grounded 3-conductor cord, type H05VV-F, with conductors
(HAR) grounded 3-conductor cord, type H05VV-F, with conductors
listed below. A suitable cord end is required for connecting to the
listed below. A suitable cord end is required for connecting to the
listed below. A suitable cord end is required for connecting to the
listed below. A suitable cord end is required for connecting to the
listed below. A suitable cord end is required for connecting to the
equipment (see unit socket) and must terminate with an IEC approved
equipment (see unit socket) and must terminate with an IEC approved
equipment (see unit socket) and must terminate with an IEC approved
equipment (see unit socket) and must terminate with an IEC approved
equipment (see unit socket) and must terminate with an IEC approved
plug for proper connection to power supply.
plug for proper connection to power supply.
plug for proper connection to power supply.
plug for proper connection to power supply.
plug for proper connection to power supply.
NON-BOOST HEATER UNITS
NON-BOOST HEATER UNITS
NON-BOOST HEATER UNITS
NON-BOOST HEATER UNITS
NON-BOOST HEATER UNITS
Nominal 1.0 mm
Nominal 1.0 mm
Nominal 1.0 mm
Nominal 1.0 mm
Nominal 1.0 mm
2
2
2
2
2
cross section rated 10 Amps
cross section rated 10 Amps
cross section rated 10 Amps
cross section rated 10 Amps
cross section rated 10 Amps
Unit Socket: IEC - 320 C13
Unit Socket: IEC - 320 C13
Unit Socket: IEC - 320 C13
Unit Socket: IEC - 320 C13
Unit Socket: IEC - 320 C13
BOOST HEATER UNITS
BOOST HEATER UNITS
BOOST HEATER UNITS
BOOST HEATER UNITS
BOOST HEATER UNITS
Nominal 1.5 mm
Nominal 1.5 mm
Nominal 1.5 mm
Nominal 1.5 mm
Nominal 1.5 mm
2
2
2
2
2
cross section rated 16 Amps
cross section rated 16 Amps
cross section rated 16 Amps
cross section rated 16 Amps
cross section rated 16 Amps
Unit Socket: IEC - 320 C19
Unit Socket: IEC - 320 C19
Unit Socket: IEC - 320 C19
Unit Socket: IEC - 320 C19
Unit Socket: IEC - 320 C19
Always turn off the unit and disconnect the line cord from the power
Always turn off the unit and disconnect the line cord from the power
Always turn off the unit and disconnect the line cord from the power
Always turn off the unit and disconnect the line cord from the power
Always turn off the unit and disconnect the line cord from the power
source before performing any service or maintenance procedures, or
source before performing any service or maintenance procedures, or
source before performing any service or maintenance procedures, or
source before performing any service or maintenance procedures, or
source before performing any service or maintenance procedures, or
before moving the unit.
before moving the unit.
before moving the unit.
before moving the unit.
before moving the unit.
Always empty the bath before moving the unit.
Always empty the bath before moving the unit.
Always empty the bath before moving the unit.
Always empty the bath before moving the unit.
Always empty the bath before moving the unit.
Never operate equipment with damaged line cords.
Never operate equipment with damaged line cords.
Never operate equipment with damaged line cords.
Never operate equipment with damaged line cords.
Never operate equipment with damaged line cords.
Refer service and repairs to a qualified technician.
Refer service and repairs to a qualified technician.
Refer service and repairs to a qualified technician.
Refer service and repairs to a qualified technician.
Refer service and repairs to a qualified technician.
In addition to the safety warnings listed above, warnings are posted
throughout the manual. These warnings are designated by an exclamation
mark inside an equilateral triangle with text highlighted in bold print. Read
and follow these important instructions. Failure to observe these instructions
can result in permanent damage to the unit, significant property damage,
personal injury or death.
