- 16 -
Section
Section
Section
Section
Section V Maintenance
V Maintenance
V Maintenance
V Maintenance
V Maintenance
To avoid electrical shock, disconnect the mains cord prior to removing
To avoid electrical shock, disconnect the mains cord prior to removing
To avoid electrical shock, disconnect the mains cord prior to removing
To avoid electrical shock, disconnect the mains cord prior to removing
To avoid electrical shock, disconnect the mains cord prior to removing
any access panels or covers.
any access panels or covers.
any access panels or covers.
any access panels or covers.
any access panels or covers.
Service Contracts
Service Contracts
Service Contracts
Service Contracts
Service Contracts
Thermo NESLAB offers on-site Service Contracts that are designed to
provide extended life and minimal down-time for your unit. For more informa-
tion, contact our Service Department (see Preface, After-sale Support).
Reservoir Cleaning
Reservoir Cleaning
Reservoir Cleaning
Reservoir Cleaning
Reservoir Cleaning
Routine cleaning can be achieved by simply sponging down the seamless
stainless steel tank with tap water. (Dish washing detergent may be used but
the tank must be thoroughly rinsed.)
To gain access to the entire reservoir the pump box and reservoir cover
should be removed.
Remove the line cord from the rear of the unit.
Remove the four screws securing the reservoir's cover.
Carefully raise the controller and cover assembly to remove it from unit.
Place the cover on its side.
Algae
Algae
Algae
Algae
Algae
To restrict the growth of algae in the bath, we recommend the bath cover be
kept in place and that all circulation lines be opaque. This will eliminate the
entrance of light required for the growth of most common algae.
Thermo NESLAB also recommends the use of Chloramine-T, 1 gram per
3.8 liters.
