Thermo Scientific E-Gel 4466611 User Manual Download Page 22

Page: 22 / 68

Live mode screen

Iris and focus settings:

Image of recommended settings for the iris and focus.

Exposure time:

The

–

slide gauge is used to adjust the amount of time the camera sensor collects signal to create an

image.

Sensitivity:

The

–

slide gauge is used to adjust signal detection sensitivity.

Extended detection:

Opens a tab with tools to adjust dynamic range. See “Perform extended detection” on page 27.

Brightness:

The

–

slide gauge is used to adjust image brightness.

Area of interest:

Allows tools to be used in selected regions of the image, in

Live mode

or for a saved image.

Overexposure:

See “Correct overexposure” on page 28.

Change:

Used to return to

Home screen

to change hardware configuration.

Control panel:

See “Description of live mode control panel tools” on page 23.

Preferences:

Open

Preferences

menu (see page 26).

File:

Open

File

menu (see page 26).

Home:

Return to

Home

screen.

Chapter 3

GelCapture software

Live mode screen

‑

Gel

™

Imager Gel Documentation System User Guide

Summary of Contents for E-Gel 4466611





































































Search results

Summary of Contents for E-Gel 4466611

Reviews:

Related manuals for E-Gel 4466611

Brands by name

Popular brands

Thermo Scientific E-Gel 4466611, User Manual

Search results

Summary of Contents for E-Gel 4466611

Reviews:

Related manuals for E-Gel 4466611

Brands by name

Popular brands