Dionex ICS-900 Installation and Quick Start Instructions
8
Doc. 065214-02 1/12
Install the Dionex ICS-900 Device
Driver
1. If you have not already done so, turn on the
PC power.
2. For a local PC: Log onto Windows XP or
Windows 2000 as an
administrator
.
For a network PC: Log on as a user with local
PC administrator privileges.
3. Turn on the power switch on the rear of the
Dionex ICS-900. Also turn on the power
switch on the rear of the AS Autosampler (if
installed).
4. The Found New Hardware Wizard appears
). Use the wizard to install the
Dionex ICS-900, as described below:
a.
If asked whether Windows can connect to
Windows Update to search for software,
select
No, not this time
.
b. Accept the default option (
Install the
software automatically
) and click
Next>
. It is not necessary to insert a
hardware installation CD-ROM.
c.
When the wizard reports that the software
for the module has been installed, click
Finish
.
The Chromeleon USB Auto
Configuration Wizard appears (see
d. Accept the default option (
Create a new
timebase
) and click
OK
.
The Auto Configuration dialog box opens
(see
).
5. If you are installing an AS in addition to the
Dionex ICS-900, ignore the Auto
Configuration dialog box for now and repeat
and
Troubleshooting Tip
If a Microsoft Windows message box asks for the
USB configuration file (cmwdmusb.inf), it
indicates that you connected the Dionex ICS-900
to the PC and turned on the Dionex ICS-900
power before installing Chromeleon or
Chromeleon Xpress. See
for how to
resolve the problem.
Before turning on the Dionex
ICS-900 power, verify that
Chromeleon or Chromeleon Xpress
is installed. If the chromatography
software is not installed first, the
Windows operating system will be
unable to identify the new USB
device.
Figure 16.
Found New Hardware Wizard
Figure 17.
USB Auto Configuration Wizard
