Section 3 Overview
3.1 Specifications
Speed Range..................................................................1~70rpm
Display Accuracy..................................................................1rpm
Speed Accuracy.................
Rocking Mode..........................Left right reciprocating motion
Angle Range........................................................................1°~15°
Angle Accuracy...............………................................…………...……±1°
Maximum Load (Centered on tray)...............4.5kg@
≤
50rpm
3.0kg@
≤
70rpm
Timing Range…………………........0 (Continuous) / 1s - 9999 min
Overall Dimensions........................................390×292×206mm
Tray Dimensions...............................................322×282×19mm
Packaging Dimensions.................................487×387×354mm
Net Weight.................................................................11.5Kg(30lb)
Gross Weight.........................................................13.5Kg(32.4lb)
Requirement..................................AC100-240V, 50/60Hz, 0.1A
Certificate.................................RoHS, WEEE, cCSAus, CE Mark
Application Environmental Conditions: indoor use
Temperature....................................................................5 to 40
℃
Voltage Fluctuation.....................±10% of the nominal voltage
Altitude...........................................................................
≤
2,000 m
Humidity...................................................................... 20% to 85%
Storage Environmental Conditions
Temperature....................................................................0 to 60
℃
Humidity.......................................20% to 90%, non-condensing
±
1rpm
≤
50rpm, ±2rpm
＞
50rpm
3.2 Environmental Conditions
3.3 Safety Instructions
Rotation Speed
Rocking Angle
Load
Time
Size
Weight
Power Supply
Others
Please read the entire instruction manual
before operating the Digital Rocker.
Digital
Rocker
DO NOT
immerse the unit for
cleaning.
DO NOT
operate the unit if it shows
signs of electrical or mechanical
damage.
WARNING DO NOT
use the
in a hazardous atmosphere
or with hazardous materials for
which the unit was not designed.
Also, the user should be aware that
the protection provided by the
equipment may be impaired if
accessories used are no provided
or recommended by the
manufacturer, or are used in a
manner not specified by the
manufacturer.
CAUTION !
To avoid electrical
shock, completely cut off power to
the unit by disconnecting the
power cord from the unit or unplug
from the wall outlet. Disconnect
unit from the power supply prior to
maintenance and service. Any
spills should be removed promptly.
Bio hazard spills should be cleaned
using approved liquid promptly.
Solvent spills are a fire hazard.
Stop the unit immediately, and DO
NOT operate until clean up is
complete and vapors have
dissipated.
Position of Loads
Place the loads in the recommended
positions below:
1. Place load at the center of the tray.
2. Place loads symmetrically around the
center of the tray.
3. Make sure to use rubber strips to
fasten containers onto the tray.
Symmetrical placement
5
|
Section 3 Overview
Asymmetrical placement
Digital Rocker 6
