4-12
Heraeus Multifuge X3F / X3FR
Thermo Scientific
4
Operation
Removing the Rotor
Removing the Rotor
To remove the rotor, proceed as follows:
1. Open the centrifuge lid.
TM
2. Grab the rotor handle with both hands and press against the green Auto-Lock
key. At the same
time, pull the rotor directly upwards with both hands and remove it from the centrifuge spindle.
Make sure not to tilt the rotor while doing this.
Aerosol-tight Rotors
When using an aerosol tight lid the rotor can only be removed with the lid closed. This is to protect
you and the samples.
TM
Figure 4-2.
Auto-Lock -lid for aerosol-tight
rotors
CAUTION
Rotors supplied with a lid for aerosol-tight
applications come with a mandrel, which
belongs to the Auto-Lock
TM
. Be sure not to place the lid onto this mandrel to prevent it from
beingdamaged.
TM
WARNING
Mind the Auto-Lock mandrel inside the lid. Do not touch the
mandrel.
Summary of Contents for 75004559
Page 2: ......
