FH100D/FH100DX Dispensing Pump Operating Manual 3-15
Thermo Scientific
Section 3
Operation
Display Legend: Below is a screenshot of the screen display for the drive in
Copy Setting Mode. An explanation of the information on the screen follows.
Figure 3-8.
Copy Setting Screen
A. Mode Display: Current operating mode.
B. START: This icon will start drive allowing for copy volume to be set.
C. Flow Direction: Pressing the ENTER key on this icon toggles between
clockwise and counterclockwise flow direction.
D. Volume Unit: This is dependent on the flow rate selected.
E. STOP: This stops the Copy and sets the volume to be dispensed. It is
displayed in position H.
F. CLEAR: Selecting this will clear the number displayed on the screen
and will allow for a new copy volume to be selected.
G. EXIT: Return to Copy Dispense Mode.
H. Volume: This is the amount that was dispensed during the copy.
COPY Setting Screen
mL/min
COPY
STOP
EXIT
START
mL
10000
A
H
C
D
E
B
G
F
CLEAR
