The Control Panel
Priming the Pump
Section 3
Operation
Thermo Scientific
3-2
FH100D/FH100DX Dispensing Pump Operating Manual
Figure 3-1.
Control Panel
•
To navigate all menus on the drive use the
directional pad
directly below the LCD screen.
• The
(ENTER) key located in the middle of the directional pad is
used to enter or select a highlighted field or option. This key is often
referred to as the ENTER key in this manual.
• The
(START/STOP) key located at the top right of the control
panel is used to start and pause the drive. This key is functional only
when in one of the four operating modes: Continuous, Time Dispense,
Copy Dispense, or Volume Dispense. This key is often referred to as
the START/STOP key in this manual.
•
The
(PRIME) key located at the bottom right of the control
panel is used to access the prime (fast forward) function. While
pressed, this key operates the drive at the maximum allowed speed/flow
rate and in the direction shown on the display. When released, the
drive returns to its original speed or flow rate.
1. Insert appropriate tubing into Pump Head.
2. Insert tube inlet into supply fluid.
3. Insert supply outlet into desired container.
4. Turn on pump using switch located on the back of the drive.
5. Press and hold the PRIME
key on the drive console to prime the
pump. Priming will stop when key is released.
CAUTION: Keep fingers away from rotor while pump is in
operation. Stop pump before loading or unloading tubing.
