Thermo Scientific Barnstead GenPure with xCAD
Ultrapure water system
31
9.6 Mounting the power pack (voltage supply)
Whenever possible, mount the power pack on the wall to the left or right of the ultra
pure water system where it is freely accessible.
Stick the universal holder which is supplied in the assembly kit to the back of the
power pack as shown in the above Figure.
Stick the universal adapter to a smooth wall surface or screw it to the wall using the
dowels and screws supplied in the assembly kit.
When the universal holder and universal adapter have been fitted, hang the power
pack in.
Plug the connecting cable (appliance cable) in the power pack socket.
Connect the power pack to the ultra pure water system (Connectors, GenPure, 4-pin
power supply connector, pos. 8) and to an earthed 100 - 240V, 50/60Hz socket.
The system is now ready for use.
