Clean Room Oven
1-1
Thermo Scientific
Section 1
Description
This advanced series of Ultra-Clean 100 ovens incorporates programmer-
controller which can be conveniently and easily operated by the user from
a front panel keyboard. Mnemonics in the display area of the programmer-
controller keeps the user informed of the parameters which are being acted
upon. An additional option allows the unit to be operated in either
automatic or manual mode.
Mechanical air circulation provides optimum temperature uniformity and
rapid recovery after door openings.
Two systems protect oven contents against overheating. An alarm setpoint
programmed in the controller initiates a visual signal in the event the
actual temperature exceeds the limit. In addition, a second system is an
independent hydraulic thermostat set by the operator to a temperature
slightly higher than the maximum operating temperature. This thermostat
is a mechanical backup to protect contents in the unlikely event the
programmer-controller experiences a failure. A red status lamp warns of
the overtemperature condition.
