![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600/precedent-c-600_operators-manual_1104429060.webp)
Operating Instructions
59
Changing the Setpoint - Both
Numerical Setpoint and Named
Product Available
If the Temperature Watch display is shown, press any soft key
to return to the Standard Display. From the Standard Display,
press the SETPOINT Key. Note that both PRODUCT and
SETPOINT are displayed as shown (Figure 54).
Figure 54: PRODUCT and SETPOINT are displayed
The NAMED PRODUCT / NUMERIC SETPOINT prompt
will appear as shown (Figure 55).
.
Figure 55: NAMED PRODUCT / NUMERIC
SETPOINT Prompt
•
Press the NUMERIC Soft Key to proceed with Changing
the Setpoint - Numeric Setpoint change as previously
shown.
•
Press the NAMED Soft Key to proceed with Changing the
Setpoint - Named Product change as shown previously.
•
Press the EXIT Soft Key to return to the Standard Display.
ON
OFF
MENU
35
°F
35
PRODUCT/
SENSORS
GAUGES
SETPOINT
.8
EXIT
NAMED
NUMERIC
NAMED PRODUCT / NUMERIC
SETPOINT?
ON
OFF